Graphic /Technical
Drawing Boards
Blundell Harling Trueline/Sherborne
A combination of the trueline unit and Sherborne backstand. The Trueline is a board and cross wire parallel motion system incorporating a simple cam brake to both ends of the graduated straightedge. The straightedge is undercut to provide inking edges. The ball-bearing pulleys are protected by moulding corner blocks. The straightedge can be tilted or raised for flexible use. The Sherborne stand is of steel construction and designed for use with A1 and A2 boards with four angle settings. |  |
Faber Castell TK drawing Boards
Portable, lightweight drawing boards without stands. Can be used in conjunction with table easel eg. Daler Rowney Lincoln Table Easel (Please click on Easel section of the website) to provide an incline. Board has double guide grooves for smooth operation of the parallel ruler. The paper clamp bar grips one or more sheets firmly and is easy to release. The parallel ruler can be operated one-handed at any position and is ideal for left handed people. | |
TK System A4 Drawing Board
 |
| 71.95 |
TK System A3 Drawing Board
TK System Plus A3 Drawing Board
with Drafting Head with 1mm overlay grid and sliding magnetic scales.
 |
| 160.25 |
Drawing Board Ancillaries
Drawing Board Clips
Marksman spring steel drawing board clips | | 0.55 |
Dusting Brush
For drawing board
 |
| 7.85 |
Anodized Aluminium Tee Square
Metal parallel bladed tee squares, suitable for either left or right handed use.
 |
| |
Rules
Transparent Rules
Acrylic Rules with Grid Lines
A range of good quality double sided bevelled acrylic rules, divided as follows: Divided in to 16ths, 32nds, 10ths, 20ths, 50ths, x mm, 1/2mm. With lined centre grid.
 |
| |
Chartmate Rules
Perspex rule with stainless steel cutting edges. Graduated mm's and cm's with graph for lining up artwork.
 |
| |
Metal Rules
Tech Sales Stainless Steel Rules
| Double sided 8ths, 16ths, 32nds, 64ths, 16ths, mm and 1/2mm | 6 inches | 2.78 |
| Double Sided | 1/2mm, 1mm 1 edge, 32nds, 64ths, 16ths other edge | 12 inches | 4.35 |
| 1/2mm, 1mm 1 edge, 32nds, 64ths, 16ths other edge | 24 inches | 8.20 |
| Single Sided | 1/2mm, mm one edge. | 1000mm | 17.50 |
Steady Safety Rule
Gives full protection to the fingers when used with a knife. Can be used with both ink and pencil. Clearly marked in both mm and inches. Bright anti-rust finish.
 |
12 | 6.05 |
Tech Style Anodyzed Aluminium Straightedge
Graduated in mm with stainless steel cutting edge and rubber back | | |
Wooden Rules
Fisco Wooden Metre Rule
Graduated in inches and 1/8" on one side, cm and mm on the reverse
 |
100cm | 16.55 |
Lyra Mini Wooden Rule
graduated with cm and mm | 17cm | 0.70 |
Scale Rules
Verulam Oval Section Scale Rules
Fully divided 300mm (also available 150mm-special order)
 |
| |
| H.1V/300 | 1:1 x 1:2 x 1:5 x 1:10 | | 20.10 |
| H.2V/300 | 1:5 x 1:50 x 1:10 x 1:100 x 1:20 x 1:200 x 1:500 x 1:1000 | | 20.10 |
| H.3V/300 | 1:1 x 1:50 x 1:20 x 1:200 x 1:5 x 1:50 x 1:1250 x 1:2500 | | 20.10 |
| H.4V/300 | (6in = 1 mile) 1:1250 x 1:2500 x 1:10000 x 1:10560 | | 15.95 |
| H.43V/300 | (5in x 1 mile) 1:500 x 1:1250 x 1:2500 X 1:10560 | | 15.95 |
| H.46V/300 | 1:2.5 x 1:25 x 1:33.33 x 1:125 x 1:250 x 1:75 x 1:150 | | 15.95 |
Verulam R.I.B.A Conversion Scales 'A' and 'B'
| H.44V/300 | 1:12 x 1:24 x 1:48 x 1:96 open divided mm full size x inch full size 1/24th fully divided | | 18.75 |
| H.45V/300 | 1:5ft x 1:20ft - 1:50ft x 1:100ft open divided | | 18.75 |
Verulam Imperial Range
| H.V203/12 | (6in = 1 mile) 1:500ft x 1:2500ft x 1:1250ft - 1:10560ft | | 18.75 |
| H.V204/12 | 1:500ft x 1:2500ft - 1/8in x 1/4in x 1/2in x 1in =1ft | | 18.75 |
Rumold Plastic Triangular Scale Rule 12"
| AN.150-1/30 | 1:20, 1:25, 1:50, 1:75, 1:100, 1:125 | | 8.30 |
| AN.150-2/30 | 1:20, 1:25, 1:33-1/3, 1:50, 1:75, 1:100 | | 8.30 |
| AN.150-31/30 (Imperial) | 3/32, 3/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1, 11/2, 3" to ft, 1/16" | | 8.30 |
| AN.150-4/30 | 1:100, 1:200, 1:250, 1:300, 1:400.1:500 | | 8.30 |
| AN.150-6/30 | 1:500, 1:1000, 1:1250, 1:1500, 1:2000, 1:2500 | | 8.30 |
| AN.150-9/30 | 1:15, 1:20, 1:25, 1:33-1/3, 1:50, 1:100 | | 8.30 |
| AN.150-DIN/30 | 1:2.5, 1:5, 1:10, 1:20, 1:100 | | 8.30 |
Linex Fan Scale
5 Fans giving 22 grads | 15cm | 13.60 |
Tape Measures
Fisco Tape
Powerlock tape. | 3m/10 feet | 9.35 |
Fisco Tape
Powerlock tape. | 5m/16 feet | 16.40 |
Rolling Rules
Linex Rolling Rule
For drawing horizontal & vertical parallel lines. Circle, arcs angles & quadrants
 |
| 18.00 |
Set Squares
Various
Chartmate Set Squares
Graduated acrylic set squares with stainless steel edges. Chartmate set squares are graduated in cm and mm, have a 5cm grid for lining up your artwork and doublesided \'finger lifts\'. They have stainless steel cutting edge.
 |
| |
| 231MT-32A | 30 - 60 degrees | long edge 30cm | 12.00 |
| 231MT-32B | 45 - 45 degrees | long edge 32cm | 12.00 |
| 231MT-35A | 30 - 60 degree | long edge 35cm | 15.00 |
| 231MT-42B | 45 - 45 degrees | long edge 42cm | 15.00 |
Chartmate Adjustable Set Squares
Are made from clear 3mm perspex with bevelled or square edges. | | |
| 6"/15cm 6.5"/17cm Arm Length | | 16.80 |
| 8"/20cm 9"/23cm Arm Length | | 19.55 |
| 10"/25cm 12"/30cm Arm Length | | 22.05 |
| 12"/30cm 15"/37cm Arm length | | 27.65 |
Templates/Drawing Aids
Flexicurves
Unique Flexicurves
Designed to produce regular or irregular curves. Made of a PVC outer casing, with a core of lead, with regulating strips of steel, bevelled edges for pencil work. Forms curves as small as 25mm.
Blue and white | | |
| Various lenghths | 30cm/12 | 6.00 |
French Curves
Tech Sales DIGI Set French Curves
Three curves 13cm, 16cm, 31cm with bevelled edges | | 6.15 |
Faber Castell French Curves
Set of three for drawing irregular curves, double ink bevels. Transparent, green tinted plastic. | | 17.50 |
Circle & Ellipse Templates
Tech Sales Circle Templates
Economy templates, tinted yellow plastic material | | |
Linex Templates
Linex produce an an extensive range of professional templates. The templates listed are from our stock at Green and Stone (subject to change). However all Linex templates are available to order through us. Please contact us if you require further information. Tel: 0044 (0)20 7352 0837 or mail@greenandstone.com | |
Linex 1263S Furniture Template
Contains symbols for furniture and groups of furniture for the areas livingroom, diningroom, bedroom/childrens room, kitchen and bathroom as well as electrical symbols.
 |
| 19.60 |
Linex 1259S Universal Architect Template
With ink bosses. For pen 0.35mm and pencil 0.5mm. Scale 1:50
Contains symbols for furniture and groups of furniture for the areas living room, dining room, kitchen and bathroom as well as electrical symbols for common use. 1mm green transparent SBS
 |
235 x 160mm | 17.65 |
Linex Architect Template 1231S
1:50, for use with 0.35mm pen
With ink bosses. Contains graduated furniture in groups and single pieces as well as kitchen appliances, sanitary and wiring. 1mm green-transparent butyrate
 |
280 x 115mm | 44.30 |
Lettering Stencils
Listed below are lettering stencils made from plastic material particularly suited to graphic projects. We also have some larger lettering stencils, made from mylar and manilla card, which are designed with craft projects in mind. These are subject to availabilty so please contact us to check stock. | |
Linex Italic Lettering Stencil (8820)
Green plastic material with ink risers. Letter height 20mm. Upper and lower case. | | 2.55 |
Jakar Lettering Stencils
A pack of four alpha-numeric different colour stencils, shatterproof plastic, 5, 10, 20 and 30mm in size. | | 2.20 |
Figure Templates
Jakar Human Figure
Metric Template. Ideal for use in Architectural and Interior design layouts. Each template has four different figures in four different scales; 1:75, 1:100, 1:125, 1:25, 1:20. Available in Male or Female. 0.4445mm pencil allowance on all openings. Overall template size: 212mm x 148mm. | | |
 | Male 4645 | | 9.85 |
 | Female 4648 | | 9.85 |
Compasses/Dividers
Ecobra Master Bow Compasses
Ecobra Instruments have been manufactured in Nuremburg West Germany for many decades and are firmly established world wide as the finest and largest range of precision drawing instruments available today.
The Master Bow features an unbreakable hoop spring and a centre screw spindle with and stops; free from play | |
Master-Bow Pencil (3741)
Has two knee joints, spigot diameter is 4mm, length 162mm.Centre wheel for fine adjustment. Working range 250mm
 |
| 22.65 |
Master-Bow Pencil with Lengthening Bar (3728)
Has two knee joints, spigot diameter is 4mm, length 162mm. Working range 500mm
 |
| 29.30 |
Universal Master Bow (60500)
Has an adaptor that will hold markers, technical pens and a swann-morton No. 3 handle to cut circles. Working range 210mm
 |
| 16.40 |
Ecobra Duo-Tec Giant Bows
Well constructed giant bow with a long life at a very reasonable price. | |
Duo Tec Quick Release (421500)
With knee joints
 |
| 22.15 |
Duo Tec Quick Release with Lengthening Bar (421510
As above with extension bar
 |
| 28.10 |
Ecobra 'K' Series
The 'College' series, these instruments are of modern design and sound construction at economical prices. The large compasses each incorporate two asymmetrical knee joints and precision geared self centering legs. The spigot diameters are 3.5mm (All compasses come as a pencil compass with pen adaptor 3566 available to buy - Please see Compass Adaptors) | |
Pencil Compass (5130)
Length 140mm with knee joint. Working range 400mm
 |
| 13.90 |
Springbow Pencil (5148)
Small Pencil Compass
 |
| 16.35 |
Plain Divider (5156)
For measuring etc. Length 152mm. Opening range 230mm | | 15.40 |
Ecobra Compass Adaptors
To attach to Ecobra compasses (especially pencil compasses) to allow them to take technical pens etc. |  |
3.5mm Technical Pen Adaptor (3566)
For use with 'K' series compass 5130 | | 5.20 |
4.0mm Technical Pen Adaptor (6466)
For use with Master Bow compass 3741 and 3728 | | 5.70 |
Universal Compass Adaptor (3723)
Beam Compasses
Ecobra Beam Compass (3836-0)
Beam 50cm. working range 980mm. complete with pencil, pen and needle. Holding section. Beams are now graduated in cm and inches.
 |
| 48.40 |
Economy Compasses
Jakar Drawing Set (1048)
Self centering geared head compass with knee joint, swivel shoulder needle unit and pencil attachment. Lengthening bar 92mm long, sidescrew pencil spring bow. Pen adaptor. Lead container with two leads
 |
| 10.95 |
Jakar Safety Compass
Basic die cast compass with plastic pencil grip. Supplied with half length black lead pencil | | 2.50 |
Proportional Dividers
Ecobra Proportional Dividers (3891)
Length 170mm. Light alloy metal with steel tips. Scales: Lines, circles and golden rule | | 190.00 |
Ruling Pens
Ecobra
Ruling Pen - Tool Steel (A.3457)
Length 125mm. Width of lines 0.25/0.8mm
 |
| 10.10 |
Lightboxes
Artograph Lightpads
A super-bright, cool and evenly illuminated surface gives you the perfect platform to get your ideas off the ground. The new LightPad |  |
Lightpad A930
| 9″ x 12″ / 229mm x 305mm | 175.00 |
Lightpad A940
| 12″ x 17″ / 305 mm x 432mm | 260.00 |
Knives & Cutters
Swann Morton Scalpel Blades & Handles
Swann Morton Handles
Available in long or short. Please see blade list to see which handle is compatible with which blade. | | |
| Short Handles | No. 3, 4 | single | 5.25 |
| Short Handles | No. 7, | single | 10.75 |
| Short Handles | No. 9 | Single | 7.50 |
| Long Handles | No. 3L, 4L | single | 12.40 |
Swann Morton Blades
 |
Made from high quality Sheffield carbon steel, these surgical blades are recommended for graphics and craft uses. | | |
| Small Blades | No. 10, 10a, 11, 12, 15
(for use with handles No. 3, 3L, 7) | Pack of 5 | 1.00 |
| Large Blades | No. 21, 22, 22a, 23, 25, 26, 27 (for use with Handles No. 4, 4L) | Pack of 5 | 1.00 |
Swann Morton Graphic Art Kit
Consisting of No.3 handle with 5 x 10a blades. | | 7.85 |
Swann Morton Retractaway
Retractable handle with 2 x 10a blades. | | 12.85 |
Swann Morton Trimaway Knife
Disposable knife with red plastic handle and a 25a blade. | | 0.90 |
Stanley Trimming Knives
Die-cast handle. Supplied with four heavy duty blades and one hooked blade. | |
Standard Trimming Knife with Fixed Blade
Retractable Trimming Knife
Replacement Blades
Utility Knives
Ecobra Utility Knife
Retractable knives with snap off blades. Available in two sizes. | | |
| Small Replacement Blades | pack of 12 | 3.90 |
| Large Replacement Blades | pack of 10 | 3.50 |
Jakar Cutting Set
Consisting of small retractable cutting knife with snap off blades, 20cm stainless steel cutting edge acrylic rule and 80 x 225mm cutting mat. | | 5.50 |
Knives for Curved Lines
Olfa Rotary Cutter RT 1/G 28
For cutting straight lines and freehand curves. Replacement blades available. | | |
Olfa Circle Cutter CMP-1
Cuts precise circles from 1cm to 15cm (0.4" to 5.9") diameter. Special rubber pad for preventing a pin hole.
 |
| 13.25 |
Green Cutting Mats
Double sided with grid on one side for lining up artwork. The cutting mat has a semi-hard rubber like surface which allows the cutter to bite into it, yet the cut will heal. Therefore the blade cannot be deflected in the direction of the previous cut. | |